Sake dawo da ramuka ta hanyar rami, wani lokaci ana kiranta da reflow soldering na wasu sassa daban-daban, yana kan hauhawa.Ta hanyar-rami reflow reflow tsarin shi ne a yi amfani da reflow soldering fasahar don walda abubuwan toshe-in da aka gyara na musamman siffa tare da fil.Ga wasu samfura irin su SMT da aka gyara da kuma abubuwan da aka lalata (fulogi-in abubuwan da aka gyara) ƙasa, wannan tsari yana gudana zai iya maye gurbin sayar da igiyoyin ruwa, kuma ya zama fasahar taron PCB a cikin hanyar haɗin yanar gizo.Mafi kyawun fa'idar sayar da reflow ta hanyar rami shine ana iya amfani da filogi ta rami don samun ingantacciyar ƙarfin haɗin gwiwa na inji yayin cin gajiyar SMT.

Fa'idodin sayar da reflow ta hanyar rami idan aka kwatanta da sayar da igiyar ruwa

 

1.The ingancin ta hanyar-rami reflow soldering ne mai kyau, da bad rabo PPM iya zama kasa da 20.

2.Labaran haɗin gwiwa da haɗin gwiwa na solder ɗin ba su da yawa, kuma ƙimar gyaran yana da ƙasa sosai.

3.PCB layout zane ba ya bukatar a yi la'akari da wannan hanya kamar yadda igiyar ruwa soldering.

4.sauki tsari mai sauƙi, aiki mai sauƙi na kayan aiki.

5.The ta-rami reflow kayan aiki ya mamaye ƙasa da sarari, saboda ta bugu da kuma reflow tanderu ne karami, don haka kawai karamin yanki.

6.Matsalar Wuxi slag.

7.The inji yana da cikakken kewaye, mai tsabta, da kuma wari kyauta a cikin bitar.

8.Through-rami reflow kayan aiki management da kuma kiyaye shi ne mai sauki.

9.The bugu tsari ya yi amfani da bugu samfuri, kowane waldi tabo da bugu manna yawa na iya daidaita bisa ga bukatar.

10.A cikin reflow, da yin amfani da na musamman samfuri, da waldi batu na zafin jiki za a iya gyara kamar yadda ake bukata.

Lalacewar siyarwar sake kwarara ta ramuka idan aka kwatanta da sayar da igiyar ruwa:

1.The kudin ta hanyar-rami reflow soldering ya fi na kalaman soldering saboda solder manna.

2.through-rami reflow tsari dole ne a musamman samfuri na musamman, mafi tsada.Kuma kowane samfurin yana buƙatar nasa tsarin samfurin bugu da samfurin sake fitarwa.

3.The ta hanyar rami reflow tanderu na iya lalata abubuwan da ba su da zafi resistant.

A cikin zaɓin abubuwan da aka haɗa, kulawa ta musamman ga abubuwan filastik, irin su potentiometers da sauran lalacewa mai yuwuwa saboda yawan zafin jiki.Tare da gabatarwar ta hanyar-rami reflow soldering, Atom ya ɓullo da da dama haši (USB jerin, Wafer jerin ... da dai sauransu) domin ta-rami reflow soldering tsari.